Country of Origin︰
The price of the original EPSON ink cartridge is expensive, how to decrease and save the cost of printing is our concern. The ink level of EPSON intelligent cartridge is recorded in the chip IC, which accurately records and controls the ink level. It cannot be reused even though the empty ink cartridge is refilled, and it results in high expense.
268 Certification: We have got 268 chip resetter CE & FCC certification.
268 Resetter can reset & refill the chip IC on the Epson intelligent ink cartridges, and do not change the property of the cartridge. Then the empty cartridge can be reused after the ink is refilled.
268 Resetter is versatility; it can automatically identify the type of ink cartridge, and then reset the chip on the cartridge into a full mode. It can be compatible with most of the Epson intelligent ink cartridges in the market.
figure 1 figure 2
268 can be used on the following Cartridges Types:
268 can be used on the following Epson printers:
Epson stylus Photo 780/785EPX/810/820/830/870/870LE/875DC/875DCS/890/895/915/925/950/1270
Epson Stylus C41/C42/C42+/C42UX/C43/C44UX/C42SX/C50/C60/C61/C62/C63/C64/C70/C70+/C80/C82/C83/C84/CX5200/CX5100/CX5300/CX3100/CX3200/CX5400/CX5200/CX6400/CX510/R300/R300M,etc.
Epson Stylus Color 680/685/777/777i etc.
Instructions for use
Please note that the reset unit contains a number of notches, which are designed to couple with the various Epson black and color chipped cartridges.
1.Align the cartridge to the correct notch on the reset unit so that the chip contacts and the pins on the resetter meet.
2.Keep the two units in firm contact. If the red light is blanking, it shows the two units contact well.
3.If the red light turns to green, it shows the reset operation is successful.
4.Cartridge is now ready for refilling with ink.
Warm Hint: According to the large clients request, we innovated adapter for resetter , so you won’t worry about the cartridge type you have , it can work for either new ink cartridge but also for old types.
figure3 figure 4
To reset ink cartridge of Epson Stylus C70/C80/C82/C83,C84,C63,C64, Stylus Photo 950/960/2100 and 2200/CX3100/CX3200/CX500/CX5100/CX5200/CX5300/CX5400/CX6400.
Also as figure 5 shows, a plastic guide plate is included for positioning the cartridges used in the printers.
When resetting the cartridge of above styles, the plastic guide plate should first be attached to the edge of the reset unit, as illustrated, The cartridge should then be brought up to the resetter so that the side of the cartridge is in contact with the plastic guide plate.
figure 5 figure 6
1.After the red LED flash, it stays on and doesn’t turn green
a). The pins on the resetter are not in good contact with the chip on the cartridge. The contact may be dirty or oily.
b). If the ink cartridge is not an original Epson brand ink cartridge, the chip may be not compatible with the resetter.
c). If the ink cartridge is an original Epson brand ink cartridge, the chip may be burned out or Epson may have changed the chip design. But it still can work with this kind of ink cartridge to fulfill the level, only the green light won’t shine, the red LED does.
2.The printing quality is not good.
a). The quality of the ink you are using may be inferior. We recommend using inks that are specifically matched to Epson’s original colors and other characteristics. (Especially if you are printing digital photographs.)
b). Air bubbles entrapped in ink. To avoid this, inject the ink VERY slowly. Also, allow the cartridge to rest for 24 hours with the ink exit nozzles facing down before using.